bombaster.

DETAILED Overview of Modes of the RF Jammer 6/2021
start from 01/04/2021

Follow the link to view the albums of RF gates:
https://vk.com/albums552157817

Complete instructions for RF jammers starting from version 2:
http://shoplifting.tech/info/rffaq4

The digital detailing of the modes in the PHOTO albums is given for the previous 5,6,and 8 modes of the RF jammer.
However, I'll leave here a brief description of the previous modes of version 5 (8 modes) and a comparison with version 6 (7-8 modes):

version 5 autumn 2020:
№1 our first mode for NEDAP and many others RF
№2 CheckPoint 
№3 the oldest existing
№4 DetexLine 
№5 BLUE STRIP
№6 experimental 2019, the efficiency is close to №1
№7 additional mode for NEDAP 2020
№8 main for NEDAP 2020

In version 6, the modes indicated in brackets remained, the rest of the new ones were created thanks to our experience in overcoming the automatic noise-adaptation systems of many RF systems.

1. CheckPoint + new NEDAP (2)
2. main 2021
3. NEDAP (8)
4. NEDAP+ (7)
5. SpectraXL
6. blue stripe (5)
7. blue stripe 2  
8. main 2018 (1)

As you can see, modes 3,4 and 6 were removed thanks to the new mode №2, and modes 5 and 7 were added specifically for locally produced RF systems.
It is also worth clarifying that such a numbering shuffle was made for the first time, and up to eight modes there used be a version with five and six modes. Modes 6,7 and 8 were added in the process of improvement since 2018, and the first five modes remained in their positions.

The description of vibration feedback:

1. = 1 short vibro - CheckPoint + new NEDAP
2. = 2 short vibro - main 2021
3. = 3 short vibro - NEDAP 
4. = 4 short vibro - NEDAP+ 
5. = 1 LONG vibro - SpectraXL
6. = 2 LONG vibro - blue stripe
7. = 3 LONG vibro - blue stripe 2  
8. = 4 LONG vibro - main 2018

DETAILED OVERVIEW:

№1:
the old main mode for CheckPoint systems
that is effective for most Chinese gates
effective for some of the newest models from NEDAP, I do not give guarantees for them until they are studied thoroughly, statistics show that mode 1 is effective.

№2:
created in 2021 for all RF systems 
excluding NEDAP, new NEDAP and some Chinese systems

№3:
for NEDAP - BASIC created in autumn 2020

№4:
the additional mode for NEDAP systems with special settings, it’s necessary in cases of installing gates in multiple aisles, for example:
a supermarket or a hypermarket with cash desks and entrances located at different distances.
The setting is used when at least four frames are installed in the store. In fact, it is not often used, the probability of coming across such a setting is extremely low. 
In Russia, it is found in Sportmaster.

How does the reaction response itself if this particular mode is needed? 
- when passing through the gate, neighboring or distant frames can react, or react from a distance.

№5:
for "Gateway Spectra XL" systems installed in Russia and the CIS; such systems haven’t been notices in Europe or America. 
The compatibility with gates from other manufacturers has not been tested, most likely it’s also effective for many gates excluding NEDAP.

№6:
the first mode for Russian gates of the BLUE STRIP. It was developed in 2018.
It’s compatible with many other models. If modes No 2 and No 1 do not help with unknown gates, try №6 

№7:
the mode for Russian gates of the BLUE STRIP type, made in 2021. It was created on our initiative to improve previous results.
The compatibility with gates of other manufacturers has not been tested, most likely it is also effective for many gates, excluding NEDAP.


№8:
the old main mode for NEDAP and many others.
It was brought to the end of the list and left just in case, as it coped with a very large percentage of various systems, and in order not to accidentally lose its effectiveness, we still left it on the list. You can always remove unnecessary modes if it bothers you.

Why is the layout of the modes created that way?

- Mode №2 is taken as a basis; it has given unique results for all years. The modes being on the side of it are located exactly so that you have the rapidness of the choice of actions. I will describe the logic:
if mode No 2 is not suitable, then you are more likely to have either a NEDAP system or something Chinese. You only need to do one action to solve the problem. 
If this does not work and it is a NEDAP system, then mode №4 will solve your problem.

You can notice all the logic can only when using. Believe us, we analyzed it thoroughly from real experience in real conditions.