FAQ ver.4 RF type smart jammer Wireless version (update 10/08/2022)
We recommend You to read this guide carefully and observe the safety, operation and maintenance instructions of the device “RF Jammer”.
This guidance contains information based on specifications available at the time of issue of the guide (25/06/2021).
Specifications can be changed without a notice as we are constantly striving to improve the quality of our devices.
I. PREAMBLE
II. The Purpose of The Device
III. Concepts and Terminology
IV. RF Jammer Control System
V. CHARACTERISTICS:
1. Configuration
2. Operating Time
3. Amplitude
4. Operating Life
VI. TERMS OF USE:
1. Device Charging
2. Rules of Using Power Bank with inserted RF Jammer in Order to Charge the Devices
3. Personal Safety
4. Not Recommended(undesirable actions)
5. Rules for Long-Term Keeping Without Use
6. Example of Using the RF Jammer
VII. Additional Information about Using RF Jammers
VIII. MODES
|
I. Preamble about the jammers in 2018 (required to be read).
I don’t create devices for those who don’t have intelligence below the minimum. For many many years I have seen very different customers: there were yesterday’s kids and very old people. All of them, who really wanted, understood the information.
No one before me has ever created such material and such detailed instructions in the form of text, and most likely no one would never do it. Let’s start with a little background and practice that is often being forgotten by many professionals, and is known by no one who just started their career:
It all started many years ago with simple, as it seems now, devices. At that time they seemed to be a miracle and REALLY expanded the possibilities, as there was nothing to look back at. But over time, ” we-are-all-perfectionists” me and the rests have increased the requirements for the quality of the devices, their appearance, usability and negligence. Here it goes.. at first, everyone was using everything and no one didn’t give a shit about how it looked like, how many batteries should be changed per day, did it fit in the pocket comfortably or not comfortably.. No one didn’t care: everyone was happy that it had been working!!! One day, I refused to look in the direction of just one seller and started to search for another places where someone tried to do something. It appeared to be that something really suitable was produced only by “the German” and by one person from Yaroslavl, but “the German’s” costed prohibitive inappropriate, I immediately figured out and it was easy to be understood that this certain device was not made by the shoplifter, as it was made without an understanding of “how it should be done,” and over the years nothing was improved and created. That is why I decided that nothing would be changed, because the real developer of this device just merged all the technology to “the German” as is was, and then it turned out that those people were even further from the topic of shops, and it was absolutely meaningless to wait for any development! And now, after 9 years, it can be actually confirmed!
The guy from Yaroslavl tried to develop at least somehow, but after some time it became difficult to find him and all the hopes for the existence of the developer of qualitative jammers were lost at all!
What had we tried to use:
the first Danko jammers on the crown(6F22 type) of the cigarette’s pack, We used, enjoyed, ADMIRED!!!
The German’s LED bright RC-bomb,, we had to be happy even with this machine.
I personally tested all sorts of experimental jammers from Danko.. There was even one with an antenna the size of a rather big cucumber, and the jammer was in the tin box of cigars!!! A wire bomb, and I was thrilled with the slightly increased radius of the signal!
*By the way.. now the real power of AM Jammer 3-4 times higher than the first Danko’s one, 2 times higher than the German’s, Polish’s, Bear’s and all the others!
Video review of old generations of jammers from my collection.
We used all sorts of boxes and many many devices, because it was necessary to Move on! And we didn’t give a fuck about which methods to use!
As a result, I began to move myself, tried to experiment, design and improve for myself, pulling the technology forward by any methods FOR MYSELF, for my family who was fed only because of my shopping activities, and I wanted more and more. I wanted the best possible opportunities, but now I have no time to go shopping, and the final technologies are in your hands..
So what do we have? I’ve taken all the technology to the new, extremely high level, improved everything, created something that never happened, what at some times everyone was just dreaming about and even I was ready to give myself a huge loot for the victory over some restrictions!
And now, here we are.. AM Jammer of the new level. I hear neat, but sincere cool reviews from cool people. The RF Jammer is just divine…
And occasionally, but there are moments when the new people or really very old ones that do not want to break their entrenched principles of work:
— MODES? Why do we need them?
I answer::
– The situation is different in different countries: different store agreements with different anti-theft companies, anti-theft companies in different countries have contracts with different manufacturers of anti-theft systems, different countries have different customs legislation and therefore there are either more local manufacturers or more imported equipment. Unfortunately, one method cannot work with everything that is written below. And for different countries, sometimes you need different modes and a set of modes. The Jammer even have the option to remove unnecessary modes, so they just do not even interfere. The desired set of modes I personally always tell you in the instructions or upon the receipt of the order. I diligently remember a database of pictures of everything that happens on the market of anti-theft systems all over the planet, think and collect the results of using devices in different parts of the world, and that’s why I can help you with the setup and improve future devices. It really pushes my knowledge even further, and then everything as it happened before: I do not stand still, I put a lot of money in the development, trips to the cities in order to test my devices and prototypes in really different conditions. There is a programmer and an engineer and a separate device collector in my team, all at the level of real “research and development work”.
And those modes are the results of choosing the best ways to block different types of gates Of THE SAME system! We can do something universal now as in the “German’s” or any other device, but it will not be as effective as possible! What about us? We need the best, we’re even willing to possess different devices only if they work and most of us are actually willing to wear anything.
It often happens like that:
I bought a device, I do not want to know anything, I want to toggle the switch and wait for a miracle to happen. Sorry, unfortunately, in our world not all is so rosy. Otherwise, tons of Jammers would have already been sold at Aliexpress and other similar places. Why are not they still sold? Because they will be filled up with negative reviews from those monkeys who just need a stone and a stick.
Excuse me for being emotional, but it’s just the opinion to sober up your mind.
Common sense says that:
– There are no universal latchkeys for even ordinary locks.
– You cannot unscrew the nut with a hammer.
– You should not drink a pill without studying the instructions or knowing the name of the drug that you need to take if you do not want die.
In a world of new, more-less intelligent methods of jamming anti-theft systems, it’s all gone far from the ability of monkeys to pick up a stick with a switch and to go to haul goods, why?
– The history of Jammers can be considered through the last 15 years. Initially the gates’ manufacturers didn’t pay any attention to protecting themselves from jammers, because there were quiet a few of them, and they were ineffective and in General the variety of gates was much more scarce!!! Only Sensormatic and Checkpoint were on the market.
– Over time, manufacturers have learned how to use the system of protection against jammers, launched the sale of piles of different models of gates with older and newer electronics, the markets got DOZENS of gates from different anti-theft companies that design their gates and electronics on DIFFERENT algorithms and principles for determining Alarms! As a result, we have a zoo of various anti-theft systems but ONLY of TWO TYPES! AM and RF!
But! No need to panic! let’s be sober and sane..
I have people who understand and quickly understood this from the very beginning not worse than I did myself, because it is not more difficult than to:
distinguish BMW from AUDI or OPEL…
Anti-theft systems on the market are also Almost monopolists!
Speaking about AM systems, most of the market is taken by Sensormatic, RF systems are lead by Checkpoint, NEDAP, Gateway. There are no more of them than the car manufacturers you know and THEY are all DIFFERENT. Each gate manufacturer has its own specific design direction, its chips and so on.
Each of these manufacturers has a line of models that are different, and it is (AGAIN) not harder to define them than to distinguish the Q7 from A5. Speaking about the gates it is actually Really easier! To prove this, I prepare all the photos layouts on all the gates OF all RF and AM systems.
And if you tell me that the gates are hidden behind the advertising, I will answer you:
— What about the light bulb on gate? They are in most cases not hidden, if the gates are hidden behind the fabric the shape is easy to be determined as well as to figure out the system. If only top or bottom is visible, it also gives a quick opportunity to understand the type. If you are shown just the HEADLIGHT, bumper, part of the car, you will be able to distinguish the headlight of Mercedes from BMW, or big-eyed Maybach? It is easy, extremely easy.. it is not harder with gates! And cars are able to be distinguished even by young children!!!
My opinion and the opinions of those who have already walked through this path:
– is this kind of unwillingness to understand what brings you money, you are preventing yourself from moving significantly more efficient and safe, you doubt too much and limit your ability to develop. Afterword: I do not need Hyper-sales in a short period of time time at any cost, I came to the sales of such inventions not as a trader. I myself as well as you was going shopping for many years, most of the inventions I made initially for myself… It follows that I do not invent, what is not under the power to be understood and started using by a simple person who just NEEDS!!!
BUT once I realized that it is unacceptable not to grow in understanding what you’re fighting against, the enemy always needs to be known! And that’s why you’re reading this now!!!From my long-term practice I recommend:
1. to open my website, explore it completely, open every link, every instruction!
2. to open YouTube and watch all my YouTube channels and watch maximum videos about our subject on my channels.
3. to study all additional instructions to the jammers.
4. to begin to understand the differences among the gates from my special albums.
5. to not doubt that you will succeed! it worked for everyone who wanted to. And those who do not want, fuck them! After all this material, you will begin to feel yourself there, in the shops… on a different level, define your real possibilities of action that will expand at times! You will see how and where to find and take what previously was not even available to your imagination.
Through my mind and my arms went a lot of really, really good shopl…(friends), acquaintances, specialists in our sphere! I’m here for you, not for your money, not for my popularity… I’m here because I wasn’t here before, and I had no one to come to and get the UNIQUE information from, that would bring me to another level. Everything was in my head. I don’t sell knick-knacks, everything that I publish has its use in our business!
Tests in order to identify current vulnerabilities of Radio Frequency anti-theft systems 8.2Mhz frequency-based technology.
The device is intended to be used by specialists and implies an understanding of the differences between Radio Frequency technology and other anti-theft systems (Acoustomagnetic and Electromagnetic).
A detailed description of different types of anti-theft systems is recommended to be studied on the websites of anti-theft companies and other specialised resources on the Internet using such websites as Google, information about the types of anti-theft systems is not prohibited to be distributed and published.
Jammer, the Device – in the article, all this means the subject of the page.
Powerbank – it is a portable device for charging mobile phone or other electronics.
Battery, built-in battery – it is built-in PowerBank Lion rechargeable battery that we charge through the charging port of the PowerBank.
Vibration – this is the indication of the activity of the vibration motor inside the framework in which the Jammer is placed.
Standby mode, Waiting Mode, Sleeping mode – the mode in which the device is ready for the instant transition to the jamming mode, simplified – “OFF”.
Active mode – the mode in which the device produces electromagnetic signal radiation at the frequency of the anti-theft system according to certain algorithms, as a result of which the algorithms of the anti-theft system are violated, simplified – “ON”.
Lock mode (locked) – the mode of the Jammer in which it does not react to any pressing except the procedure of presses to Wake it up (unlock). The Powerbank screen is still available to work and will not stop indicating the charge level when you press the button, simplified – “COMPLETELY OFF”
Long press – pressing lasting from 0.5 sec to 1.5 sec, if less or more, pressing is not counted.
Click, short press – pressing lasting less than 0,5сек, if more, pressing is not counted.
Skip, pause between presses – no pressing from 0 sec to 0.3 sec, if less or more, “skip” is not counted.
Button – the button on the case of Powerbank serving in the ordinary life of Powerbank to check the level of charge of the built-in battery.
Indicator – device (field detector, checker, tester) with which, depending on its capabilities and configuration, you can: check the type (AM or RF) anti-theft system, cause a real anti-theft system alarm, check the activity of the signal from the Jammer.
Antenna – part of the RF Jammer responsible for the transmission of the signal to the surrounding space.
Indicator display – LED glow inside the detector-indicator at the time of receipt of the electromagnetic signal at a frequency similar to the detector.
False Alarm, Alarm – a sound and light reaction of the antitheft system caused by restarting mode of the program analysis, or about the definition of the anti-theft tags.
Antitheft EAS system – A EAS system made of one or more frames (racks, gates) which alerts the people by light and sound signalling that it found the anti-theft sensor (tag, magnet, alarm, badge, thing) somewhere near.
USB port –
USB plug –
USB cable –
Kindergarten – the place where you are taught to eat a puree with a spoon, not a palm.
since 2015, our devices have received a PowerBank disguise and a control system through pressing a SINGLE button and receiving vibration responses to these clicks.
WHY???
- previously, the device was turned on and off by a toggle switch and had only a light bulb, and this was annoying, since it was constantly required to look at the jammer and this action often attracted the attention of security that a store visitor was doing something strange and looking into his pocket.
The jammer has several modes of operation (tracks) that differ:
— power, algorithms, frequencies, pauses inside the signals, and some use all known types of jamming inside one jamming mode at once.
In total, we have left 8 of the most effective RF jamming modes after the final tests at the time of summer 2021, there is information about this in the last chapter of this manual.
Imagine instead of PowerBank and jammer control buttons, typical modern wireless headphones:
— headphones need to be turned on, off, there are 8 RF or 10 AM music tracks in "our headphones", you can switch between tracks, and also determine which track is playing now.
• turn on the music - touch the earphone twice, and to turn off one long touch (2-3 seconds);
• switch tracks back and forth - just like in real headphones, 2 touches turn on the next track, 3 touches the previous one;
• quickly return to the 1st track - 4 touches;
• to understand which track you are on now - just one touch and the headphones will tell you the track number by vibration.
Why can't you just have a SCREEN with numbers?
- since at the moment of the approaching to the gate and active actions, it may be necessary to quickly change the activity mode, and vibration is the best method of interaction inside your pocket or right in your hand, without distracting your gaze from the real situation.
so:
To turn on the jammer, you just need to click the button 2 TIMES, as a result we get a double vibration = the jammer turned ON.
To turn off the device, you need ONE longer press (about 2 seconds), resulting in a long vibration = the jammer has turned OFF.
And to be sure that the jammer in your pocket continues to work, we have applied a vibration indication and ONCE every 6 (AM) or 9 (RF) seconds, the jammer vibrates in your pocket so that you can feel it.
If the battery charge drops to a certain low level, the vibration accelerates to 1 time in 3 seconds, and you feel that you will need to charge the device soon. BUT! Don't panic, you still have 15-20 minutes of use.
We added these features in 2015 and they remain unchanged.
Subsequently, an upgrade required the addition of several modes and we added the following simple functions to identify the modes of operation:
When the jammer is already on, you only need to press ONE time to know the mode number that is "coded" into the number and length of the vibration responses. (Like Morse code, but easier)
After 1 short press you will get 1 to 4 short vibrations or 1 to 4 slightly longer vibrations.
Originally there were only 8 modes, the response was from 1 to 8 short vibrations, but this proved too inconvenient and it was hard to count more than 5 modes, so we improved the system a bit:
Mode №1. = 1 short vibration
Mode №2. = 2 short vibrations
Mode №3. = 3 short vibrations
Mode №4. = 4 short vibrations
Mode №5. = 1 LONG vibrations
Mode №6. = 2 LONG vibrations
Mode №7. = 3 LONG vibrations
Mode №8. = 4 LONG vibrations
As a result, a method of switching between modes had to be invented, and we chose the most intuitive way possible:
switch forward = 2 clicks
switch backward = 3 clicks
fast return to mode 1 = 4 clicks
Any of these actions are accompanied by a double vibration in the same way as when switching on, which means > ACTION done successfully.
Please reread this text and try it out in practice until you fully understand what is written. This is really important to you.
For your safety and long-term storage, so that no one accidentally turns on the device without your permission, the "lock and unlock" option has been implemented.
So that you can lock the device in an emergency and not confuse the number of taps, we made it happen with 5,6,7 quick taps.
Detailed instructions for unlocking on the first pages!
In total, there are 8 program commands in the stub control system:
1. Turn ON (Enable)
2. check current active mode
3. Turn ON (Enable) the following mode in order
4. Turn ON (Enable) previous mode in order
5. Fast return to mode №1
6. Turn off
7. Block
8. Unlock
In the control scheme, the number of short taps is indicated with an underline, and the elongated taps are indicated by italics:
As a result of each correctly performed action you get a special vibration response from the Jammer, this instruction is made according to the scheme:
▬ what has been done
= what is the result of the action
► how is it manifested physically
When the device is not locked (in standby mode):
for ON:
▬ 2 short presses
= "ON" activate the last ACTIVE mode
► 2 short vibrations.
! battery charge indication during activity:
! BATTERY IS IN NORMAL CONDITION = 1 vibration every 9 seconds
! CHARGE REQUIRED = 1 vibration every 3 seconds
ONLY ACTIVE (ON) mode functions:
for OFF:
▬ 1 long press (during activity)
= "OFF" switch to standby mode
► fading vibration.
for indication of the current mode number:
▬ 1 short click
= indication of the current mode number
► 1-4 short vibration responses(showing which mode is one from 1 to 4)
!or!
► 1-4 long vibration responses(showing which mode is one from 5 to 8)
+ continuation of ACTIVE work without pauses in the current mode.
to switch to the next mode:
▬ 2 short clicks
= switch to +1 (next) mode
► 2 short vibration responses
+ continuation of ACTIVE work on the next mode from the list. (after the mode №8, next chosen one is Mode №1)
to switch to the previous mode:
▬ 3 short clicks
= switch to -1 (previous) mode
► 2 short vibration responses
+ continuation of ACTIVE work on the previous mode from the list. (after the mode №1, next previous one is Mode №8)
to FAST switch to the mode №1:
▬ 4 short clicks
= FAST switch to mode 1
► 2 short vibration responses
+ continuation of ACTIVE work on the mode №1.
In any mode and state of the device, in addition to the already locked state:
▬ 5-7 short clicks
= completely block the jammer (in any state of the device)
► increasing>fading vibration.
In the blocked state:
▬ 4 long presses
= unlock and immediately starts working in the last mode selected
► double short vibration
(warning! the devices are delivered in a locked mode, study the video instruction of unlocking carefully, I constantly have to explain about the “long press”, the duration of the skips and the duration of the presses themselves is important).
(Locking is not a method of turning the device on/off, if you have not read the instructions carefully and for a long time turned the device on with four long presses and turned off by 5-7 fast ones, then I will not be guilty that the button in the device would be destroyed 5 times faster).
V. CHARACTERISTICS.
1. Configuration:
• Powerbank.
• USB cable to charge the Powerbank from any USB.
• A set of anti-theft tags.
2. Operating Time:
— in continuous turned-On mode – 60 minutes up to the level at which the jammer will use the rapid vibro-indication to inform about the need to charge the built-in battery.— in switching it On in the real rhythm of using 1-5 minutes for one switch-on, the usage time increases by an average of 30%, because when the battery is switched On continuously due to battery heating, the chemical processes inside the accumulator run faster and stop longer after turning it Off.
3. Amplitude:
— jammers are designed for individual use only without the purpose of overlapping another person who possibly carries anti-theft sensors. 90% of users are lone wolves, and by knowing this, in order to reduce the size of devices, reduce battery consumption, optimise electronics, we initially develop all the jammers to protect only the user of the device.
But! Read the instructions completely and you will find some tips on how to do it together.
Important:
— Anti-theft systems have different algorithms for signal processing, external data analysis, various electronics, and accordingly the jammer in different systems and different operating modes has a different amplitude, but never below the minimum one tested for the protection of the user device.
Special rules during the passage by the MONO-anti-theft-systems:
— Mono systems have within the same frame and the receiving antenna and the radiating antenna, so in most cases they have much more power than systems with two or more gates. In this case, the jammer must be closer to the frame, and the anti-theft tags should be on the other side of the body.
— the maximum effect is achieved with a parallel arrangement of the device relative to the plane of the gate, this is due to the coincidence of the directivity of the electromagnetic fields.
Due to the physical characteristics of the 8.2 MHz frequency, the range of the device partially decreases with a snug fit to the body, or with a large grip with large hands, because our body itself is a noticeable absorber for such frequencies.
The recommended distance of the larger plane of the device from the surface of the body is = 2-3 cm. It follows from this that it is not advisable to use the device in a tight-fitting pocket of your trousers, you reduce the radius of the device.
4. Operating Life of device:
— limited only by the need to replace the built-in battery as a result of wear and tear, if you don’t use the device intensively or use moderately, the operating life is at least 2 years (due to our tests).
— jammer’s electronics is put in completely shock-dust-moisture-proof capsule, the work-failure may only be caused by damaging the PowerBank system electronics or after short circuits.
1. Device Charging:
- charging is carried out through the microUSB port.
- when fully discharged, the PowerBank does not react on pressing, the built-in LEDs do not react.
- if the built-in battery is discharged below the critical level, then it requires time to charge the battery to the minimum level to start the power Bank electronics, it can take from several minutes to one hour.
- if the device is charging the LEDs blink or the digital display changes gradually.
- when the battery reaches full charge, all blinking LEDs and numbers stop, we recommend to disconnect the power Bank from the charger and connect again, as the charge can be calculated incorrectly from the first time after a long charge.
Important:
- not all cases of portable chargers have high-quality built-in electronics to indicate (determinate) the charge level of the built-in battery accurately, so the Jammer additionally analyses the battery status protecting you from risks.
- LED indication screen of PowerBank charge system (digital, dots, digits) is not connected in any way with the device “Jammer”, and the glow or absence of the current glow indication of PowerBank charge system will not give you any information about the operation of the device ”Jammer”. All information about the work of the Jamming device is transmitted only through “vibration/vibro-answers”.
- USE ONLY QUALITATIVE CHARGERS.
- Do not use low-quality car chargers and do not charge the jammer from another PowerBank, since the quality of energy transfer can damage not the jammer, but the PowerBank.
2. Using PowerBank with built-in RF Jammer in order to charge other devices:
- Remember, the main purpose of the device that you hold in your hands is not related to charging other devices, this function is stored only for cases of checking your device because of suspicions about the appointment of PowerBank, if it performs the function of PowerBank, then it will be returned you back it without unnecessary suspicion!
- It is allowed to charge the PowerBank during the activity of the Jammer.
- remember, the less charge-discharge cycles you produce the longer your battery will last.
- the real capacity of the built-in battery 2*2600 mAh, instead of the real Power Bank 12000 mAh, because the Jammer usually takes place equal to two of the three built-in batteries.
- some devices (phones, tablets, players) do not always automatically start to consume energy after connecting the wire, in this case, you need to click once the PowerBank button and begin the process of charging the gadget.
3. Personal Safety:
1. there is administrative or criminal liability for keeping Jammers while visiting public places without a certificate of a licensed anti-theft company in some countries, if you forgot to take the documents with you follow the rules of personal safety:
- don’t advertise the appointment of the device;
- if you need to transfer the device to third parties, block it, there is a quick lock function for such cases;
- the Jammer is built into the Powerbank for easy use and for your personal safety;
- observe the compatibility of the jammer, mode of operation and anti-theft system that you are checking for vulnerability carefully.
2. We decline all responsibility for using the device for other purposes.
4. Warning! Not Recommended:
1. very fast passage through the anti-theft system, because the extremely fast energy flow from the Jammer can unpredictably affect the electronics of the anti-theft system causing a false alarm.
2. the approach to the anti-theft system from around the corner or from behind the wall, because the extremely fast energy flow from the Jammer can unpredictably affect the electronics of the anti-theft system causing a false alarm.
3. activate the jammer in the immediate vicinity (3 meters) of the anti-theft system, as extremely fast energy flow from the jammer can unpredictably affect the electronics of the anti-theft system causing a false alarm.
4.the cornerwise passage between the anti-theft frames, since anti-theft tags may be too close to the anti-theft frame, or the extremely fast energy flow from the jammer can unpredictably affect the electronics of the anti-theft system causing a false alarm.
5. to use the device at a critically low charge level when the internal Powerbank indicators stopped responding to pressing of a button. The jammer has the ability to use the built-in battery at a very low level, this is done in the case of need to leave the store even at extremely low levels of the battery.
6. not to use continuously the device for more than 15-20 minutes in order avoid overheating, despite the full protection of the device from thermal changes, so you will reduce the wear of the battery.
7. don’t leave the device in extreme temperature or climatic conditions, protect it from water, falls, impacts.
8. in consequence of the little study of the effect of the Jammer on electronic devices, we do not recommend using the device to people with pacemakers and other electronic elements interlinked with your health, but keep in mind that all types of anti-theft systems are not prohibited for being installed in public places, and the jammers have a ten times lower level of signal radiation.
5. Rules for Long-Term Keeping Without Use:
- it is desirable to keep the device in a locked mode, this method reduces the consumption in standby mode and reduces the likelihood of accidental activation by strangers.
- it is recommended to charge the Powerbank fully once a month, as the Powerbank electronics have a constant low power consumption.
- keep the device in a dry place.
6. Example of Using the RF-Jammer:
- to learn the instructions on this page “from the beginning to the end»;
- to read the description of jammers on the page devoted to RF jammers;
- to watch a video on managing the Jammer by the button;
- to make sure the built-in battery is charged;
- to make sure the Jammer is not locked -> (turn on and off);
- to switch the device into the active jamming state -> (double-click the button);
- to select the desired mode based on the model of the anti-theft system through which you want to pass -> (double-click switches in order forward modes, and triple-click switches modes back in order);
- if you have an RF tag, put it in a convenient place to check the effectiveness of jamming;
- to pass in a quiet rhythm without sharp accelerations, because they can cause sharp changes in energy production from the Jammer;
- if you need a long stay inside the store transfer the Jammer into the standby mode -> (1 long press);
- ........ (in the hope of the presence of the reader’s intelligence).
|
Warning! the devices are delivered in "a locked mode" (if the device is delivered to you discharged, charge it with a normal phone charging with microUSB connector).
To reduce the number of incorrect attempts, I ask you to watch the video very carefully, and realise that one of the most important points is: |
The practice of using the Jammer in the case of passing together and more:
a) If you and your partner are moving towards each other in order to pass through the anti-theft system at the same time, it is recommended: the person who carries the Jammer should approach the gates a little earlier than the person who carries the anti-theft tag, as the gate needs time to go to the stage of disabling the analysis program. For quite a short time the anti-theft system after the impact on them by the Jammer returns its normal condition, this means that if you go in the same direction with the person who carries the anti-theft sensors, it is better if he goes behind you at a distance of no more than a meter.
b) If you want to stand next to the gates it would be perfect if you stand close to the gates, as practice has shown it does not cause any suspicion, in the process of testing we did incredible crazy test experiments.
A little bit of social engineering... Basing on my personal experience and practical testing of the jammers in the most secure shopping centres, I can tell you the following:
at the beginning of using the new device in your hands, you are likely to behave unnaturally, as you will feel that you are somehow attracting any special attention of staff or security. I hasten to please you, the security and staff are mostly low-intelligent people who do not attach special importance to their duties, and so they can see the device with their eyes or even see the fact of theft and do not understand what is happening, because there are the most template methods of thinking in the heads of these people. And also these people like ordinary people are constantly thinking about their personal Affairs, about what a gorgeous ass that cashier has, and that cashier thinks about has the seller, that is staring at her, below the belt, and the seller thinks about how much he wants to go to the toilet. Stand in the place of your opponent and realise how pathetic he is.
I personally and many of my loved ones have been with this device to a lot of places and nowhere we have caused additional suspicions, the easier you feel among them, the less you are visible to them.
all albums with RF gates - https://vk.com/albums552157817
mode №1 = 1 short vibration:
CheckPoint, all Crosspoint RF, Catalyst, NEDAP, MTC, Amersec, AGON, Lucatron
+ all RF models are assembled from chrome pipes
mode №2 = 2 short vibration:
CheckPoint, Catalyst, NEDAP, Lucatron
mode №3 = 3 short vibration:
old mode from 2013 year
mode №4 = 4 short vibration:
Gateway, ShopGuard, Lucatron Venus
mode №5 = 1 LONG vibration:
Gateway, ShopGuard
mode №6 = 2 LONG vibration:
NEDAP, Checkpoint
modes are set in decreasing order of statistical efficiency, if the first recommended mode causes remote gate operation, try the next one.
best modes for gate manufacturers and models:
NEDAP - 6,1,2
CheckPoint - 1,2,6,3
Crosspoint - 1
Amersec - 1
Catalyst - 1,2
AGON - 1,2
Gateway - 4,5,6,2
ShopGuard - 2,1,4,5
Lucatron - 1,2
Lucatron Venus - 4
MTC - 1
all RF models are assembled from chrome pipes - 1
Detex and DetexLine - 2,4,5,6
Transparent Gateway DesignerNeo is the only system (rare) that if four or more frames are used at the same time give rare failures (reactions after passing through the frames), it is recommended to bring the jammer closer to the frame that receives the signal (with two bars), in the case of remote reactions use mode 4,5. If there are no more than two frames, the problem does not arise.
- MODE №1:
The code name "Almighty" was assigned at the time when we were at the beginning of the road and dreamed of defeating all the gates in one mode.
- specialized mode for NEDAP
- It is also compatible with most RF gates of different manufacturers: AMERSEC, CATALYST, MTC and you can surely use this mode if you see any RF gates made of chromed metal pipes, these are analog systems and they are vulnerable to this mode.
- Compatible with CROSSPOINT RF gates all models
- not compatible with GATEWAY manufacturer
- MODE №2:
for gates manufactured by CheckPoint, Lucatron, and many other systems.
+ is also able to suppress some systems of the NEDAP system in the event that mode 1 causes reactions from a distance.
- MODE №3 :
This mode is absent in the wireless version due to the absence of DetexLine, Detex and other nameless gates often found in Russia outside the CIS area. A complete substitute for GateWay systems are modes No. 5.6 (in the wireless version mode No. 4.5). This is the only reason we left it on the list: expanding your capabilities in case of non-standard settings for these systems (which is common).
- MODE №4:
It is an additional mode for solving problems that arise when mode 2 is incompatible with CheckPoint or mode 1 with NEDAP.
Over the course of lengthy research, testing, and experiments, several dozen methods of suppression were created, we left only the most effective, and we personally liked mode 3 personally, maybe you will never need it when using it, but if mode No. 2 causes remote reactions of CheckPoint gates, try it out.
Used only when all other modes do not solve the problem.
- MODE №5:
for gates from the manufacturer Gateway, .
+ is a special mode for gates that are used only in Russia: White Gateway Spectra XL without a metal detector that are installed in most ADIDAS stores.
These gates differ from the others by built-in foil detection systems, and are an extremely powerful Chinese system that will never pass certification in civilized countries.
- MODE №6:
Explore photo albums.
It is also a solution for gates of different manufacturers, it helps in special cases when the main modes do not fit the gates of unknown local manufacturers.
It is also capable of suppressing NEDAP, CheckPoint systems in case of incompatibility with special modes.
RESULT:
The layout of the modes is created in such a way that when using the necessary mode next to it (next or previous) there are always auxiliary modes. For example, next to mode 1, which is the main one for the NEDAP, there is mode 2 and 6, both of which are able to jam the gate in a slightly different way in case of non-standard gate settings. And next to mode 4 are 3 and 5, they are capable of suppressing the system of getaways.
Using the main mode you always have an alternative suppression option, the best choice is to switch to the next mode in order if you used the required special mode before.
Technical second:
Most RF systems have a small number of settings for searching for a tag (usually no more than two), and therefore a small number of modes are required.
Since in different countries (if you read the very beginning) there are different manufacturers on the market of anti-theft systems, we ask you to inform us about these gates directly with photos by any means (messengers, social networks, email), and if I’m online (and I’m there almost always), I will immediately recommend you which mode to choose, or how best to determine which mode is more suitable for this system.
Identified and defeated RF gate is not less than 95% of the gate across the planet. Your device, with a certain effort to remember the appearance of the gate, will not be on the shelf without work.
